… Replaceable polyurethane tyres are mounted onto a cast steel drumdor durability and siperior traction. … Euroweld - RedRock Column & Boom …

… helium are used as shielding gases in TIG welding to prevent oxidation during the welding process. A well-maintained and properly adjusted …

… to the extreme high hardness, please consult us for a succesfull procedure.  … Hardfacing Ni-hard in the cement industry …

… good ductility after prolonged exposure at temperatures of 1200, 1400, 1600°F (650, 760 and 870°C) for 16,000 hours. Suitable for joining …

… Good resistance against hot cracking due to the high Mo content. During build-up welding, the weld metal already achieves approximately … 316Ti, 316Cb, 316LN, 444 S31640, S31603, S31653, S31600, S31630, S44400 … 309LMo Tig … A 5.9: ER309LMo … 14343-A: W 23 12 2 L …

… "NiLo'" and offer the lowest schrinkage possible to avoid cracks during heating and the cooling period. The weld deposit also retains … GJMW-350, EN- GJMW-550 , GTS 35, GTS 55, GTW 35, GTW 55 EN1563: EN-GJS-400-15, EN-GJS-400-18, EN-GJS-450-10, EN-GJS-500-7, EN-GJS-600-3, EN-GJS-700-2. GGG40, …

… MPa and some wires only have 600 MPa but why is this so important? During wire feeding through the welding gun the wire surface is …

… than AISI 316 due to the high Mo. content. Suitable for use up to 400°C … 1.4429, 1.4434, 1.4435, 1.4436, 1.4438, 1.4439, 1.4453, …

… In case of sensitive base material preheating is recommended at 300 - 400 °C. Old Hardfacing layers should be removed, clean or grind …

… less than 1% nickel to full fill NACE requirements and cover more procedures up to 500 MPa yield strength steels. CEWELD® AA M500 can also be … 65, Oceanfit 355, Oceanfit 420, Oceanfit 460, alform plate 460M; durostat 400, 450, 500, durostat B2     … AA M500 … A 5.28: E80C-Ni1 H4 … A …