… anodizing. Non-heat treatable. Thicker sections should be preheated (150°C) prior to welding. … AlMgSi 0, AlSiMg (A), AlSi 1 MgMn, …

… with good corrosion and acid resistance. Scale resistance up to 1150ºC, crack and wear resistant, suitable for rebuilding wornout parts. …

… Non-heat treatable. Thicker sections should be preheated (150°C) prior to welding. … G-AlSi10Mg, G-AlSi11 G-AlSi12 (Cu), …

… Recommended for operating temperatures up to 1150° C in carburized low-sulphur combustion gas, e. g. reforming ovens …

… is possible. High reserve of toughness and crack resistance. Flux FL 150 of FL 160 can be used in combination with this wire. … 2,25% Cr, 1% …

… in concentrated (98.5 %) sulphuric acid at temperatures of up to 150 °C (300 °F). … CEWELD® SA Nicro 690 Strip is mainly used for ESW …

… covers a weight range of alloys. Thicker sections should be preheated (150°C) prior to welding. … Aluminium alloys: AlMg3, AlMg4, …

… exceeded. The working temperature should be between 100°C (212 °F) and 150°C (302 °F) . As welding flux FL 155 should be used because of its …

… resistant up to 950ºC. Interpass temperature should be kept below 150ºC.  … 1.4828, 1.4829, 1.4893, 1.4835, 1.4818, 1.4825, 1.4826, …

… against attack of sulphourus gases at higher temperatures up to 1150 °C. When welding CEWELD 4820 AC low heat-input is required as …